TURF TRACER S-SERIES
Call for Pricing
Price
Make:
360 Yield Center
Model:
TURF TRACER S-SERIES
Category:
Exmark, New, Turf Tracer, Walk-Behind Mowers
With the Exmark Turf Tracer S-Series, you can choose from a variety of rugged engines. Then, match that power to cutting decks in 36-, 48-, and 52-inch widths. In whatever configuration you choose, you’ll get our patented Enhanced Control System (ECS) for ultimate operator comfort. Which translates to day-long operator productivity.
Mower Deck Widths: 36″ 48″ 52″
Equipment Specs
| Steering Control | Hydro drive with Enhanced Control System (ECS), forward/reverse, left/right or zero-turn. |
| Casters | .38″ thick caster yoke arms |
| Front Caster Tires | 9 x 3.5-4, smooth-tread, semi-pneumatic. |
| Drive Tires | 16 x 6.5-8, 4-ply Turf Master® |
| Safety Package | Operator Presence Controls (OPC). Operator must have speed control lever in neutral and blades disengaged to leave operator’s position without stopping engine |
| Parking Brake | Lever-actuated mechanical compression. |
| Electrical | No battery, recoil start w/ 5 amp clutch coil |
| Cup Holder | No |
| Engine Model | FS481V |
| Engine Brand | Kawasaki® |
| Engine Series | V-Twin |
| Engine Speed | 3,600 rpm |
| Air Filter | Standard Engine Manufacturer’s air filter |
| Drive Description | Twin Hydro-Gear variable-displacement pumps and twin high-efficiency Parker/Ross wheel-drive motors with 1″ (2.54 cm) tapered shafts. |
| Speed | Infinitely variable speed selection from 0– 6.2 mph (10 kmph) forward, 0–2.2 mph (3.5 kmph) reverse. |
| PTO Engagement | Electromagnetic 105 ft-lbs clutch. |
| Fuel Capacity | 5-gallon (18.9-L) fuel tank. |
| Drive Wheel Release | Allows unit movement without engine running. |
| Deck Lift | Manual lift with hairpin from hole to hole for position adjustment. |
| Engine Type | Carbureted |
| Engine Displacement | 603 |
| Drive | Hydro-Drive |
| Fuel Indicator | None |
| Carb Compliant | Yes |
| Fuel Type | Gas Carbureted |
| Model Description | Turf Tracer S-Series 14.5 HP* Kaw FS481V w/36″ UltraCut Series 3 Deck |
| *The gross horsepower of these gasoline engines was laboratory rated at 3600 rpm by the engine manufacturer in accordance with SAE J1940 or SAE J2723. As configured to meet safety, emission and operating requirements, the actual engine horsepower on these mowers may be significantly lower. | |
| **The gross horsepower of the 3TNV80FT was laboratory rated at 2600 rpm; the 3TNV88C was laboratory rated at 3000 rpm by the engine manufacturer in accordance with SAE J1995. As configured to meet safety, emission and operating requirements, the actual engine horsepower on these mowers may be significantly lower. | |
| Deck Style | Floating Deck |
| Deck Style Description | Full-floating UltraCut Series 3, side discharge standard, with molded discharge chute and option to bag or mulch. |
| Width / Cutting Deck | 36″, 48″ and 52″ |
| Deck Construction | 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge welded spindle mounting locations for improved strength. |
| Cutting Heights | 1.5″ (3.8 cm) to 4.5″ (11.4 cm) in 0.5″ (1.3 cm) increments. |
| Blade Spindles | No maintenance, sealed and non-greasable spindles; 7.75″-diameter cutter housing with 25mm (.98″) diameter spindle shaft and splined blade driver. |
| Blade Tip Speed | Approximately 18,500 fpm. |
| Blades | 2 Blades at 18.00″ Length |
| Width | 47.5 in. (120.7 cm) |
| Length | 77.7 in. (197.4 cm) |
| Height | 42.0 in. (106.7 cm) |
| Curb Weight | 573 |
Similar Products
TURF TRACER X-SERIES
Call for Pricing
By virtually any measure, the Turf Tracer X-Series represents the defi...