Price
By virtually any measure, the Turf Tracer X-Series represents the definitive, full-featured hydro mower. Whether you choose the 52- or 60-inch cutting deck, the UltraCut™ Series 4 with splined spindle blade driver is up to the toughest jobs. As are the X-Series engines—Kohler® EFI, and Kawasaki®. Ground speeds up to 6.75 mph, and up to 2.25 in reverse, also rank the Turf Tracer X-Series among the most productive mowers in its class.
Mower Deck Widths: 52″ 60″
Equipment Specs
Steering Control | Hydro drive with Enhanced Control System (ECS), forward/reverse, left/right or zero-turn. |
Casters | .38″ thick caster yoke arms |
Front Caster Tires | 11 x 4.0-5, smooth tread, semi-pneumatic. |
Drive Tires | 18 x 8.5-8, 4-ply Turf Master® |
Safety Package | Operator Presence Controls (OPC). Operator must have speed control lever in neutral and blades disengaged to leave operator’s position without stopping engine |
Parking Brake | Lever-actuated mechanical compression. |
Electrical | 12-volt battery with 20-amp alternator. |
Power Components | |
Engine Model | ECV650 |
Engine Brand | Kohler® |
Engine Series | Command™ EFI |
Engine Speed | 3,600 rpm |
Air Filter | Heavy-duty canister air filtration system |
Drive Description | Twin Hydro-Gear variable-displacement pumps and twin high-efficiency Parker/Ross wheel-drive motors with 1″ (2.54cm) tapered shafts. |
Speed | Infinitely variable speed selection from 0– 6.75 mph (10.9 kmph) forward, 0–2.25 mph (3.6 kmph) reverse. |
PTO Engagement | Electromagnetic 200 ft-lbs clutch. |
Fuel Capacity | 5-gallon (18.9-L) fuel tank. |
Drive Wheel Release | Allows unit movement without engine running. |
Deck Lift | Manual lift with hairpin from hole to hole for position adjustment. |
Engine Type | Electronic Fuel Injected |
Engine Displacement | 694 |
Drive | Hydro-Drive |
Fuel Indicator | None |
Carb Compliant | Yes |
Fuel Type | Gas EFI |
Model Description | Turf Tracer X-Series 21 HP* Koh EFI ECV650 w/60″ UltraCut Series 4 Deck |
Deck Style | Floating Deck |
Deck Style Description | Full-floating UltraCut Series 4. Side discharge standard, with molded discharge chute and option to bag or mulch. |
Width / Cutting Deck | 52″ and 60″ |
Deck Construction | 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 10-gauge formed and welded spindle mounting locations for improved strength. |
Cutting Heights | 1.5″ (3.8 cm.) to 4.5″ (11.4 cm) in 0.5″ (1.3 cm) increments. |
Blade Spindles | No maintenance, sealed and non-greasable spindles; 7.75″-diameter cutter housing with 25mm (.98″) diameter spindle shaft and splined blade driver. |
Blade Tip Speed | Approximately 18,500 fpm. |
Blades | 3 Blades at 20.5″ Length |
Width | 73.0 in. |
Length | 84.8 in. |
Height | 45.0 in. |
Curb Weight | 760 |